WELCOME TO Cangzhou Lion Pipeline technology Co., Ltd.
  • page_banner


  • Weld Overlay Clad Pipe

    Weld Overlay Clad Pipe

    Molding Process: Interference fit is realized through hydraulic machinery recombination

    Production Scope: DN80-DN1800

    Main Material:Base:Carbon Steel,Alloy Steel,Pipeline Steel,etc.Lining:Stainless Steel,Duplex steel,Nickel-based Alloy,Titanium,Copper and other Corrosion-resistant Alloys.

    Application Condition:Widely used in Petrochemical,Coal Chemical,Refining,Oil and Gas Transmission,Marine Environment,Power,Heating and Other projects.

  • Bi-metal composite clad pipe

    Bi-metal composite clad pipe

    Bi-metal Clad Pipe and Bend are cast with mold vanishing vacuum suction casting cladding process. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. Bi-metal composite clad pipe takes carbon steel or low alloy steel pipe as base pipe and CRA pipe as layer or lining pipe by patented technology and special equipment, it is produced in a special metallurgical or mechanical process to guarantee a tight bonding between ...
  • API SPEC 5LD CRA Clad or Lined Steel Pipe

    API SPEC 5LD CRA Clad or Lined Steel Pipe

    This specification covers seamless and welded clad steel line pipe and lined steel line pipe with enhanced corrosion-resistant properties suitable for use in pipeline transportation systems in the petroleum and natural gas industries. The clad and lined steel line pipe specified herein is composed of a carbon steel backing or base material outside (in some cases inside and/or outside) and a corrosion-resistant alloy (CRA) layer or lining inside of the pipe. The base material conforms to API 5...


    Pipeline System is one of the world’s leading manufacturer of seamless steel pipes .



    Leading edge technology – We use the modern European manufacturing and inspection equipment. All pieces are 100% inspected in accord with API, ASME, NACE and customer requirements.

  • API 5LD clad piping,weld clading

    API 5LD clad piping,weld clading

    CLAD PIPING Weld Overlay is a process governed by API 5LD. Weld Cladding provides comparable wear and corrosion resistance at a fraction of the cost of solid alloy solutions. Our weld overlay utilizes multiple layers of nickel alloy on a carbon steel backing which is accomplished with minimal diffusion of the substrate.The finished material will greatly increase service life compared to carbon solutions. In addition to pipes and tubes, the technology can be applied to virtually any fitting o...
  • Solid CRA lined pipe and CRA clad pipe

    Solid CRA lined pipe and CRA clad pipe

    Solid CRA lined pipes or CRA clad (cladding) pipes are known to be corrosion-resistant that consists of an inner pipe which is also corrosion-resistant and a carbon steel outer pipe which can withstand external and internal pressure CRA clad or lined steel pipe can be equally allocated pressure to backing material & corrosion-resisting to layer. Material combinations dramatically reduce the cost. Furthermore, cost effectiveness increases as length grows, and operational expenses are lower...
  • Solid CRA, Clad and Lined Pipes

    Solid CRA, Clad and Lined Pipes

    Corrosion resistant alloys (CRAs) are commonly used in the oil & gas industry to protect metal assets in the exploration and production, refineries, and processing plants from corrosion. A carbon steel pipe clad with CRA provides a highly economical alternative to the use of solid CRA pipe. The high-density infrared (HDIR) cladding process is a high productivity fusion process that offers a scalable alternative to laser and weld overlay, an easier to inspect and install alternative compar...
  • Nickle Alloy Corrosion Resistant Clad Pipes

    Nickle Alloy Corrosion Resistant Clad Pipes

    Cladding refers to a process where a metal, corrosion resistant alloy or composite (the cladding material ) is bonded electrically, mechanically or through some other high pressure and temperature process onto another dissimilar metal (the substrate) to enhance its durability, strength or appearance. The majority of clad products made today uses carbon steel as the substrate and aluminum, nickel, nickel alloys, copper, copper alloys and stainless steel as the clad materials to be bonded. Typi...
  • Bimetallic Titanium Clad Steel Pipe

    Bimetallic Titanium Clad Steel Pipe

    materials series (bimetal clad pipe, multi metal clad pipe) Category: cooper-steel clad pipe, stainless steel-copper pipe, stainless steel-steel clad pipe; titanium-steel clad pipe, titanium-stainless steel clad pipe, nickel-steel clad pipe, nickel-stainless steel clad pipe, nickel-cooper clad pipe, zirconium-steel clad pipe, tantalum-steel clad pipe. Spec: OD: φ20-φ2000mm, Wall Thickness/WT: 2.5-50mm Length: 3,000-12,000mm Bimetal clad steel pipe It is a new type of wear- resistant and corro...


    ERW CARBON STEEL PIPES – Electric Resistance Welded Pipe

    ERW Pipe stands for Electric Resistance Welded Pipe, featuring cost efficiency and a closer tolerance of wall thickness when compared with seamless steel pipe. It is widely used in fencing, scaffolding, engineering, etc. To ensure high precisions and quality of ERW Pipe, our SMC uses of high qualified materials, and have rigid quality control.

  • Corrosion resistant CRA Clad and Lined pipe

    Corrosion resistant CRA Clad and Lined pipe

    Specifications: SA516GR.70+UNS N04400 CLAD PIPE Pipe diameter: 632mm Pipe wall thickness:11mm Pipe Length:5830mm Pipe Material:SA516GR.70+UNS N04400 Technique: GTAW Welded. Grade: SB 127 UNS N04400 Application: Chemical process equipment, crude oil stills, gasoline and fresh water tanks, marine engineering equipment, valves, pumps and fasteners. The characteristics of Monel 400/ UNS N0400 Monel 400 has excellent resistance to corrosion by many reducing media such as sulfuric and hydrochloric ...
12 Next > >> Page 1 / 2