WELCOME TO Cangzhou Lion Pipeline technology Co., Ltd.
English
  • page_banner

Products

  • Bimetal Clad Pipe and Bend

    Bimetal Clad Pipe and Bend

    Pipeline System offering Bi Metal Clad Pipe, Bend. Bi Metal Clad Pipe, Bi-Metal Clad Pipe, Bimetal Cladding Steel Pipe, Bi-Metal Pipe, Bimetal Clad Pipe, Bimetal Clad Bend Bimetal Clad Pipe and Bend are cast with mold vanishing vacuum suction casting cladding process. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. Outer of bend uses hot-bending bend and lining is cast with high-chromium cast iron. Bends and oth...
    inquirydetail
  • Solid CRA, Clad and Lined Pipes

    Solid CRA, Clad and Lined Pipes

    Corrosion resistant alloys (CRAs) are commonly used in the oil & gas industry to protect metal assets in the exploration and production, refineries, and processing plants from corrosion. A carbon steel pipe clad with CRA provides a highly economical alternative to the use of solid CRA pipe. The high-density infrared (HDIR) cladding process is a high productivity fusion process that offers a scalable alternative to laser and weld overlay, an easier to inspect and install alternative compar...
    inquirydetail
  • Solid CRA lined pipe and CRA clad pipe

    Solid CRA lined pipe and CRA clad pipe

    Solid CRA lined pipes or CRA clad (cladding) pipes are known to be corrosion-resistant that consists of an inner pipe which is also corrosion-resistant and a carbon steel outer pipe which can withstand external and internal pressure CRA clad or lined steel pipe can be equally allocated pressure to backing material & corrosion-resisting to layer. Material combinations dramatically reduce the cost. Furthermore, cost effectiveness increases as length grows, and operational expenses are lower...
    inquirydetail
  • API 5LD clad piping,weld clading

    API 5LD clad piping,weld clading

    CLAD PIPING Weld Overlay is a process governed by API 5LD. Weld Cladding provides comparable wear and corrosion resistance at a fraction of the cost of solid alloy solutions. Our weld overlay utilizes multiple layers of nickel alloy on a carbon steel backing which is accomplished with minimal diffusion of the substrate.The finished material will greatly increase service life compared to carbon solutions. In addition to pipes and tubes, the technology can be applied to virtually any fitting o...
    inquirydetail
  • Nickel Base Alloy Lined Pipe,clad pipes

    Nickel Base Alloy Lined Pipe,clad pipes

    The main alloying elements of nickel-based alloys are copper,chromium and molybdenum. Nickel Base Alloy Lined Pipe has a good overall performance, resistance to various acid corrosion and stress corrosion.Clad plates are used as raw material for the production of metallurgically clad pipes. The plates consist of a base material and a corrosion resistant alloy material. They are linked together firmly by a diffusion bridge. The first application (1905 US production) is a nickel-copper (Ni-Cu) ...
    inquirydetail
  • CLAD PIPE & CLAD PIPE FITTINGS

    CLAD PIPE & CLAD PIPE FITTINGS

    Leading edge technology – We use the modern European manufacturing and inspection equipment. All pieces are 100% inspected in accord with API, ASME, NACE and customer requirements.

    inquirydetail
  • Nickle Alloy Corrosion Resistant Clad Pipes

    Nickle Alloy Corrosion Resistant Clad Pipes

    Cladding refers to a process where a metal, corrosion resistant alloy or composite (the cladding material ) is bonded electrically, mechanically or through some other high pressure and temperature process onto another dissimilar metal (the substrate) to enhance its durability, strength or appearance. The majority of clad products made today uses carbon steel as the substrate and aluminum, nickel, nickel alloys, copper, copper alloys and stainless steel as the clad materials to be bonded. Typi...
    inquirydetail
  • Slip-On plate flange

    Slip-On plate flange

    Sealing surface form: flat (FF), protruding surface (RF)
    Material:
    Carbon Steel: ASTM A105, 20#, Q235, 16Mn, ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2 ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70;
    Stainless Steel (Stainess Steel): ASTM A182 F304, 304L, F316, 316L, 1Cr18Ni9Ti, 0Cr18Ni9Ti, 321, 18-8;
    Alloy Steel (Alloy Steel): ASTM A182 F1, F5a, F9, F11, F12, F22, F91, A182F12, A182F11, 16MnR, Cr5Mo, 12Cr1MoV, 15CrMo, 12Cr2Mo1, A335P22, St45.8/III; Specification: 1/2′′～80′′ (DN10-DN5000)
    Pressure rating: 0.25Mpa ~ 250Mpa (150Lb ~ 2500Lb)
    Common standards:
    GB: GB9112-88 (GB9113·1-88～GB9123·36-88)
    American standard: ANSI B16.5, ANSI 16.47 Class150, 300, 600, 900, 1500 (TH, LJ, SW)
    Japanese standard: JIS 5K, 10K, 16K, 20K (PL, SO, BL)
    German standard: DIN2527, 2543, 2545, 2566, 2572, 2573, 2576, 2631 , 2632, 2633, 2634, 2638
    (PL, SO, WN, BL, TH)
    Italian standards: UNI2276, 2277, 2278, 6083, 6084, 6088, 6089, 2299, 2280, 2281, 2282, 2283
    (PL, SO, WN, BL, TH) British Standard: BS4504, 4506
    Ministry of Chemical Industry Standard: HG5010-52 ~HG5028-58, HGJ44-91～HGJ65-91
    HG20592-97(HG20593-97～HG20614-97)
    HG20615-97 (HG20616-97～HG20635-97)
    Mechanical Department Standard: JB81-59～JB86-59, JB/ T79-94~JB/T86-94
    pressure vessel standard: JB1157-82~JB1160-82, JB4700-2000~JB4707-2000

    inquirydetail
  • DIN Screwed Flanges

    DIN Screwed Flanges

    Material: Carbon Steel/Stainless Steel/Alloy Steel

    Pressure: PN6/PN10/PN16/PN25/PN40

    Size: DN10-DN2000 etc.

    Product:DIN THREADED FLANGE 2566

    Packing: Plywood Cases/Wooden Pallets/Other packaging according to customers’ requirements

    Technics: Forged

    Surface: Anti-rust black & yellow paint/anti-rust varnish/transparent anti-rust oil/ galvanized

    Certificate: API Q1、5LD/ASME (U&PP)/CE/TUV/BV/ABS/LR/DNV/ ISO/CCS

    inquirydetail
<< < Previous 345678